It is multi-system welding unit having the three most common welding methods in the same package. It is based on the most up-to-date technology in the welding field. Many different auxiliary functions simplyfy the work of the welder and increase the productivity of his work. It is most suitable where a job demands a continuous change of welding method. The following different facilities are provided in one package
A coolant pump fitted on a tank,
Diamond Dresser 2 nos.,
Oil can, Dead Center 2 nos.
Tool kit.
Additional attachment extra cost
Internal Grinding Attachment,
Balancing Stand,
Balancing Mandrel,
Three Points Steady Rest,
Two points Steady Rest,
Radius Truing Device,
Spare wheel Flange,
Independent Four Jaws Chuck,
Magnetic Coolant Pump,
Grinding Gauge.
Co2 Regulator cum Flow Meter
Helmet with glass
Pair of hand Gloves
Wire Brush
Apron & Spray
POWER SOURCE
MODEL
INV-500
Static Characteristics
Type
Constant Potential
Input Supply
Voltage
V
380-415
Phase
Nos.
3
Frequency
Hz
50-60
Welding Current Range
A/V
10/10 – 500/40
Rating 100% Duty Cycle
KVA
22
Open Circuit Voltage
V
80
Maximum Input Current
Amps
28
Load Ability @ 100%
Amps
390
Load Ability @ 60%
Amps
500
Cooling Type
Forced Air Cooling
Insulation
Class
F
WIRE FEEDER
MODEL
FEEDINV-500
Wire Diameter
Wire Drive Motor
Type
Permanent Magnet DC MOTOR
Drive System
Type
2 – Roll Quick Release
Wire Feed Speed
m/min
0 to 20
TORCH
MODEL
KD-36
Rated current at 100% Duty Cycle Co 2
Amps
400
Cable Hose Length
Mtr.
3
Cooling
Type
Gas/Water
POWER SOURCE
L
W
H
INVERTOR
760 mm
465 mm
610 mm
WIRE FEEDER UNIT
535 mm
235 mm
330 mm
Adding product to your cart
It is multi-system welding unit having the three most common welding methods in the same package. It is based on the most up-to-date technology in the welding field. Many different auxiliary functions simplyfy the work of the welder and increase the productivity of his work. It is most suitable where a job demands a continuous change of welding method. The following different facilities are provided in one package
A coolant pump fitted on a tank,
Diamond Dresser 2 nos.,
Oil can, Dead Center 2 nos.
Tool kit.
Additional attachment extra cost
Internal Grinding Attachment,
Balancing Stand,
Balancing Mandrel,
Three Points Steady Rest,
Two points Steady Rest,
Radius Truing Device,
Spare wheel Flange,
Independent Four Jaws Chuck,
Magnetic Coolant Pump,
Grinding Gauge.
Co2 Regulator cum Flow Meter
Helmet with glass
Pair of hand Gloves
Wire Brush
Apron & Spray
POWER SOURCE
MODEL
INV-500
Static Characteristics
Type
Constant Potential
Input Supply
Voltage
V
380-415
Phase
Nos.
3
Frequency
Hz
50-60
Welding Current Range
A/V
10/10 – 500/40
Rating 100% Duty Cycle
KVA
22
Open Circuit Voltage
V
80
Maximum Input Current
Amps
28
Load Ability @ 100%
Amps
390
Load Ability @ 60%
Amps
500
Cooling Type
Forced Air Cooling
Insulation
Class
F
WIRE FEEDER
MODEL
FEEDINV-500
Wire Diameter
Wire Drive Motor
Type
Permanent Magnet DC MOTOR
Drive System
Type
2 – Roll Quick Release
Wire Feed Speed
m/min
0 to 20
TORCH
MODEL
KD-36
Rated current at 100% Duty Cycle Co 2
Amps
400
Cable Hose Length
Mtr.
3
Cooling
Type
Gas/Water
POWER SOURCE
L
W
H
INVERTOR
760 mm
465 mm
610 mm
WIRE FEEDER UNIT
535 mm
235 mm
330 mm
It is multi-system welding unit having the three most common welding methods in the same package. It is based on the most up-to-date technology in the welding field. Many different auxiliary functions simplyfy the work of the welder and increase the productivity of his work. It is most suitable where a job demands a continuous change of welding method. The following different facilities are provided in one package
A coolant pump fitted on a tank,
Diamond Dresser 2 nos.,
Oil can, Dead Center 2 nos.
Tool kit.
Additional attachment extra cost
Internal Grinding Attachment,
Balancing Stand,
Balancing Mandrel,
Three Points Steady Rest,
Two points Steady Rest,
Radius Truing Device,
Spare wheel Flange,
Independent Four Jaws Chuck,
Magnetic Coolant Pump,
Grinding Gauge.
Co2 Regulator cum Flow Meter
Helmet with glass
Pair of hand Gloves
Wire Brush
Apron & Spray
POWER SOURCE
MODEL
INV-500
Static Characteristics
Type
Constant Potential
Input Supply
Voltage
V
380-415
Phase
Nos.
3
Frequency
Hz
50-60
Welding Current Range
A/V
10/10 – 500/40
Rating 100% Duty Cycle
KVA
22
Open Circuit Voltage
V
80
Maximum Input Current
Amps
28
Load Ability @ 100%
Amps
390
Load Ability @ 60%
Amps
500
Cooling Type
Forced Air Cooling
Insulation
Class
F
WIRE FEEDER
MODEL
FEEDINV-500
Wire Diameter
Wire Drive Motor
Type
Permanent Magnet DC MOTOR
Drive System
Type
2 – Roll Quick Release
Wire Feed Speed
m/min
0 to 20
TORCH
MODEL
KD-36
Rated current at 100% Duty Cycle Co 2
Amps
400
Cable Hose Length
Mtr.
3
Cooling
Type
Gas/Water
POWER SOURCE
L
W
H
INVERTOR
760 mm
465 mm
610 mm
WIRE FEEDER UNIT
535 mm
235 mm
330 mm
It is multi-system welding unit having the three most common welding methods in the same package. It is based on the most up-to-date technology in the welding field. Many different auxiliary functions simplyfy the work of the welder and increase the productivity of his work. It is most suitable where a job demands a continuous change of welding method. The following different facilities are provided in one package
It is multi-system welding unit having the three most common welding methods in the same package. It is based on the most up-to-date technology in the welding field. Many different auxiliary functions simplyfy the work of the welder and increase the productivity of his work. It is most suitable where a job demands a continuous change of welding method. The following different facilities are provided in one package
A coolant pump fitted on a tank,
Diamond Dresser 2 nos.,
Oil can, Dead Center 2 nos.
Tool kit.
Additional attachment extra cost
Internal Grinding Attachment,
Balancing Stand,
Balancing Mandrel,
Three Points Steady Rest,
Two points Steady Rest,
Radius Truing Device,
Spare wheel Flange,
Independent Four Jaws Chuck,
Magnetic Coolant Pump,
Grinding Gauge.
Co2 Regulator cum Flow Meter
Helmet with glass
Pair of hand Gloves
Wire Brush
Apron & Spray
POWER SOURCE
MODEL
INV-500
Static Characteristics
Type
Constant Potential
Input Supply
Voltage
V
380-415
Phase
Nos.
3
Frequency
Hz
50-60
Welding Current Range
A/V
10/10 – 500/40
Rating 100% Duty Cycle
KVA
22
Open Circuit Voltage
V
80
Maximum Input Current
Amps
28
Load Ability @ 100%
Amps
390
Load Ability @ 60%
Amps
500
Cooling Type
Forced Air Cooling
Insulation
Class
F
WIRE FEEDER
MODEL
FEEDINV-500
Wire Diameter
Wire Drive Motor
Type
Permanent Magnet DC MOTOR
Drive System
Type
2 – Roll Quick Release
Wire Feed Speed
m/min
0 to 20
TORCH
MODEL
KD-36
Rated current at 100% Duty Cycle Co 2
Amps
400
Cable Hose Length
Mtr.
3
Cooling
Type
Gas/Water
POWER SOURCE
L
W
H
INVERTOR
760 mm
465 mm
610 mm
WIRE FEEDER UNIT
535 mm
235 mm
330 mm
It is multi-system welding unit having the three most common welding methods in the same package. It is based on the most up-to-date technology in the welding field. Many different auxiliary functions simplyfy the work of the welder and increase the productivity of his work. It is most suitable where a job demands a continuous change of welding method. The following different facilities are provided in one package
