The Universal Cylindrical Grinding Machine ideally suited to performing repetitive grinding operations or small quantity reduction with equal ease. Features of our existing range of machines. All models have hydraulic and mechanical able traverse. Wheel Head rapid approach for the operating conveniently. In all models variable speed of work head and internal grinding spindles facilities are available if required on all models. We use antifriction turcite “B” slid-way material on the slides in all our models. Hand – operated lubrications pump for sufficient lubrication of slides. Surface finish 2 microns (improved values can be obtained by using selected grades of grinding wheel applicable to material to be ground).
A coolant pump fitted on a tank
Diamond Dresser 2 nos
Oil can
Dead Center 2 nos
Tool kit
Internal Grinding Attachment
Balancing Stand
Balancing Mandrel
Three Points Steady Rest
Two points Steady Rest
Radius Truing Device
Spare wheel Flange
Independent Four Jaws Chuck
Magnetic Coolant Pump
Grinding Gauge
Dimensions
305-455
600-800
1000
1250
1500-2000
Table Swivel
9+3
9+3
6+3
6+3
6+3
Centre Height
130 mm
130 mm
150 mm
155 mm
220 mm
WORK HEAD
Work Head Speeds r.p.m. 3 Steps (SGI 305/455/600/800 mm)
50 to 350
Morse Taper Center
No. 3
Work Head Speeds r.p.m. 4 steps (SGI 1000-1250/1500-2000 mm)
35 to 350
Morse Taper Center
No 4 to 5
Work Head Swivel
90 degree
TABLE
Traverse speeds 4 steps (Mechanical)
80 to 385 mm/min.
Traverse speed step-less (Hydraulic)
50 to 1000 mm/min
WHEEL HEAD
Rapid approach to all machines
50 mm
Wheel head with a hand wheel (305/455/600/800)
80 mm
Wheel head with a hand wheel (1000/1250)
100 mm
Wheel head with a hand wheel (1500/2000)
170 mm
Increments of feed dial
0.005 mm
Swivel of wheel head
45-45 degree
Wheel speeds (SGI 305/455/600/800 mm)
1800-2000
Standard size of wheel
355 x 25.4 x 127 mm or 355x 38 x 127 mm
Wheel speeds (SGI 1000/1250 mm)
1500-1800
Standard size of wheel
406 x 38 x 127 mm
Wheel speeds (SGI 1500/2000 mm)
1200-1500
Standard size of wheel
508 x 50.80 x 254 mm
POWER
Wheel head (SGI 305/455/600/800/1000/1250 mm)
3 H.P. / 5 H.P.
Wheel Head (SGI 1500/2000 mm)
5 H.P. / 7.5 H.P.
Work Head (SGI 305/455/600/800 mm)
0.5 H.P.
Work Head (SGI 1000/1250 mm)
1 H.P.
Work Head (SGI 1500/2000 mm)
1.50 H.P.
Mechanical Table (SGI 305/455/600/800/1000/1250)
0.5 H.P.
Mechanical Table (SGI 1500/2000)
1 H.P.
Hydraulic
1/2 H.P.
Coolant Pump
0.10 H.P.
Internal Grinding Attachment
1 H.P.
Adding product to your cart
The Universal Cylindrical Grinding Machine ideally suited to performing repetitive grinding operations or small quantity reduction with equal ease. Features of our existing range of machines. All models have hydraulic and mechanical able traverse. Wheel Head rapid approach for the operating conveniently. In all models variable speed of work head and internal grinding spindles facilities are available if required on all models. We use antifriction turcite “B” slid-way material on the slides in all our models. Hand – operated lubrications pump for sufficient lubrication of slides. Surface finish 2 microns (improved values can be obtained by using selected grades of grinding wheel applicable to material to be ground).
A coolant pump fitted on a tank
Diamond Dresser 2 nos
Oil can
Dead Center 2 nos
Tool kit
Internal Grinding Attachment
Balancing Stand
Balancing Mandrel
Three Points Steady Rest
Two points Steady Rest
Radius Truing Device
Spare wheel Flange
Independent Four Jaws Chuck
Magnetic Coolant Pump
Grinding Gauge
Dimensions
305-455
600-800
1000
1250
1500-2000
Table Swivel
9+3
9+3
6+3
6+3
6+3
Centre Height
130 mm
130 mm
150 mm
155 mm
220 mm
WORK HEAD
Work Head Speeds r.p.m. 3 Steps (SGI 305/455/600/800 mm)
50 to 350
Morse Taper Center
No. 3
Work Head Speeds r.p.m. 4 steps (SGI 1000-1250/1500-2000 mm)
35 to 350
Morse Taper Center
No 4 to 5
Work Head Swivel
90 degree
TABLE
Traverse speeds 4 steps (Mechanical)
80 to 385 mm/min.
Traverse speed step-less (Hydraulic)
50 to 1000 mm/min
WHEEL HEAD
Rapid approach to all machines
50 mm
Wheel head with a hand wheel (305/455/600/800)
80 mm
Wheel head with a hand wheel (1000/1250)
100 mm
Wheel head with a hand wheel (1500/2000)
170 mm
Increments of feed dial
0.005 mm
Swivel of wheel head
45-45 degree
Wheel speeds (SGI 305/455/600/800 mm)
1800-2000
Standard size of wheel
355 x 25.4 x 127 mm or 355x 38 x 127 mm
Wheel speeds (SGI 1000/1250 mm)
1500-1800
Standard size of wheel
406 x 38 x 127 mm
Wheel speeds (SGI 1500/2000 mm)
1200-1500
Standard size of wheel
508 x 50.80 x 254 mm
POWER
Wheel head (SGI 305/455/600/800/1000/1250 mm)
3 H.P. / 5 H.P.
Wheel Head (SGI 1500/2000 mm)
5 H.P. / 7.5 H.P.
Work Head (SGI 305/455/600/800 mm)
0.5 H.P.
Work Head (SGI 1000/1250 mm)
1 H.P.
Work Head (SGI 1500/2000 mm)
1.50 H.P.
Mechanical Table (SGI 305/455/600/800/1000/1250)
0.5 H.P.
Mechanical Table (SGI 1500/2000)
1 H.P.
Hydraulic
1/2 H.P.
Coolant Pump
0.10 H.P.
Internal Grinding Attachment
1 H.P.
The Universal Cylindrical Grinding Machine ideally suited to performing repetitive grinding operations or small quantity reduction with equal ease. Features of our existing range of machines. All models have hydraulic and mechanical able traverse. Wheel Head rapid approach for the operating conveniently. In all models variable speed of work head and internal grinding spindles facilities are available if required on all models. We use antifriction turcite “B” slid-way material on the slides in all our models. Hand – operated lubrications pump for sufficient lubrication of slides. Surface finish 2 microns (improved values can be obtained by using selected grades of grinding wheel applicable to material to be ground).
A coolant pump fitted on a tank
Diamond Dresser 2 nos
Oil can
Dead Center 2 nos
Tool kit
Internal Grinding Attachment
Balancing Stand
Balancing Mandrel
Three Points Steady Rest
Two points Steady Rest
Radius Truing Device
Spare wheel Flange
Independent Four Jaws Chuck
Magnetic Coolant Pump
Grinding Gauge
Dimensions
305-455
600-800
1000
1250
1500-2000
Table Swivel
9+3
9+3
6+3
6+3
6+3
Centre Height
130 mm
130 mm
150 mm
155 mm
220 mm
WORK HEAD
Work Head Speeds r.p.m. 3 Steps (SGI 305/455/600/800 mm)
50 to 350
Morse Taper Center
No. 3
Work Head Speeds r.p.m. 4 steps (SGI 1000-1250/1500-2000 mm)
35 to 350
Morse Taper Center
No 4 to 5
Work Head Swivel
90 degree
TABLE
Traverse speeds 4 steps (Mechanical)
80 to 385 mm/min.
Traverse speed step-less (Hydraulic)
50 to 1000 mm/min
WHEEL HEAD
Rapid approach to all machines
50 mm
Wheel head with a hand wheel (305/455/600/800)
80 mm
Wheel head with a hand wheel (1000/1250)
100 mm
Wheel head with a hand wheel (1500/2000)
170 mm
Increments of feed dial
0.005 mm
Swivel of wheel head
45-45 degree
Wheel speeds (SGI 305/455/600/800 mm)
1800-2000
Standard size of wheel
355 x 25.4 x 127 mm or 355x 38 x 127 mm
Wheel speeds (SGI 1000/1250 mm)
1500-1800
Standard size of wheel
406 x 38 x 127 mm
Wheel speeds (SGI 1500/2000 mm)
1200-1500
Standard size of wheel
508 x 50.80 x 254 mm
POWER
Wheel head (SGI 305/455/600/800/1000/1250 mm)
3 H.P. / 5 H.P.
Wheel Head (SGI 1500/2000 mm)
5 H.P. / 7.5 H.P.
Work Head (SGI 305/455/600/800 mm)
0.5 H.P.
Work Head (SGI 1000/1250 mm)
1 H.P.
Work Head (SGI 1500/2000 mm)
1.50 H.P.
Mechanical Table (SGI 305/455/600/800/1000/1250)
0.5 H.P.
Mechanical Table (SGI 1500/2000)
1 H.P.
Hydraulic
1/2 H.P.
Coolant Pump
0.10 H.P.
Internal Grinding Attachment
1 H.P.
The Universal Cylindrical Grinding Machine ideally suited to performing repetitive grinding operations or small quantity reduction with equal ease. Features of our existing range of machines. All models have hydraulic and mechanical able traverse. Wheel Head rapid approach for the operating conveniently. In all models variable speed of work head and internal grinding spindles facilities are available if required on all models. We use antifriction turcite “B” slid-way material on the slides in all our models. Hand – operated lubrications pump for sufficient lubrication of slides. Surface finish 2 microns (improved values can be obtained by using selected grades of grinding wheel applicable to material to be ground).
A coolant pump fitted on a tank
Diamond Dresser 2 nos
Oil can
Dead Center 2 nos
Tool kit
Internal Grinding Attachment
Balancing Stand
Balancing Mandrel
Three Points Steady Rest
Two points Steady Rest
Radius Truing Device
Spare wheel Flange
Independent Four Jaws Chuck
Magnetic Coolant Pump
Grinding Gauge
Dimensions
305-455
600-800
1000
1250
1500-2000
Table Swivel
9+3
9+3
6+3
6+3
6+3
Centre Height
130 mm
130 mm
150 mm
155 mm
220 mm
WORK HEAD
Work Head Speeds r.p.m. 3 Steps (SGI 305/455/600/800 mm)
50 to 350
Morse Taper Center
No. 3
Work Head Speeds r.p.m. 4 steps (SGI 1000-1250/1500-2000 mm)
The Universal Cylindrical Grinding Machine ideally suited to performing repetitive grinding operations or small quantity reduction with equal ease. Features of our existing range of machines. All models have hydraulic and mechanical able traverse. Wheel Head rapid approach for the operating conveniently. In all models variable speed of work head and internal grinding spindles facilities are available if required on all models. We use antifriction turcite “B” slid-way material on the slides in all our models. Hand – operated lubrications pump for sufficient lubrication of slides. Surface finish 2 microns (improved values can be obtained by using selected grades of grinding wheel applicable to material to be ground).
A coolant pump fitted on a tank
Diamond Dresser 2 nos
Oil can
Dead Center 2 nos
Tool kit
Internal Grinding Attachment
Balancing Stand
Balancing Mandrel
Three Points Steady Rest
Two points Steady Rest
Radius Truing Device
Spare wheel Flange
Independent Four Jaws Chuck
Magnetic Coolant Pump
Grinding Gauge
Dimensions
305-455
600-800
1000
1250
1500-2000
Table Swivel
9+3
9+3
6+3
6+3
6+3
Centre Height
130 mm
130 mm
150 mm
155 mm
220 mm
WORK HEAD
Work Head Speeds r.p.m. 3 Steps (SGI 305/455/600/800 mm)
50 to 350
Morse Taper Center
No. 3
Work Head Speeds r.p.m. 4 steps (SGI 1000-1250/1500-2000 mm)
35 to 350
Morse Taper Center
No 4 to 5
Work Head Swivel
90 degree
TABLE
Traverse speeds 4 steps (Mechanical)
80 to 385 mm/min.
Traverse speed step-less (Hydraulic)
50 to 1000 mm/min
WHEEL HEAD
Rapid approach to all machines
50 mm
Wheel head with a hand wheel (305/455/600/800)
80 mm
Wheel head with a hand wheel (1000/1250)
100 mm
Wheel head with a hand wheel (1500/2000)
170 mm
Increments of feed dial
0.005 mm
Swivel of wheel head
45-45 degree
Wheel speeds (SGI 305/455/600/800 mm)
1800-2000
Standard size of wheel
355 x 25.4 x 127 mm or 355x 38 x 127 mm
Wheel speeds (SGI 1000/1250 mm)
1500-1800
Standard size of wheel
406 x 38 x 127 mm
Wheel speeds (SGI 1500/2000 mm)
1200-1500
Standard size of wheel
508 x 50.80 x 254 mm
POWER
Wheel head (SGI 305/455/600/800/1000/1250 mm)
3 H.P. / 5 H.P.
Wheel Head (SGI 1500/2000 mm)
5 H.P. / 7.5 H.P.
Work Head (SGI 305/455/600/800 mm)
0.5 H.P.
Work Head (SGI 1000/1250 mm)
1 H.P.
Work Head (SGI 1500/2000 mm)
1.50 H.P.
Mechanical Table (SGI 305/455/600/800/1000/1250)
0.5 H.P.
Mechanical Table (SGI 1500/2000)
1 H.P.
Hydraulic
1/2 H.P.
Coolant Pump
0.10 H.P.
Internal Grinding Attachment
1 H.P.
The Universal Cylindrical Grinding Machine ideally suited to performing repetitive grinding operations or small quantity reduction with equal ease. Features of our existing range of machines. All models have hydraulic and mechanical able traverse. Wheel Head rapid approach for the operating conveniently. In all models variable speed of work head and internal grinding spindles facilities are available if required on all models. We use antifriction turcite “B” slid-way material on the slides in all our models. Hand – operated lubrications pump for sufficient lubrication of slides. Surface finish 2 microns (improved values can be obtained by using selected grades of grinding wheel applicable to material to be ground).
A coolant pump fitted on a tank
Diamond Dresser 2 nos
Oil can
Dead Center 2 nos
Tool kit
Internal Grinding Attachment
Balancing Stand
Balancing Mandrel
Three Points Steady Rest
Two points Steady Rest
Radius Truing Device
Spare wheel Flange
Independent Four Jaws Chuck
Magnetic Coolant Pump
Grinding Gauge
Dimensions
305-455
600-800
1000
1250
1500-2000
Table Swivel
9+3
9+3
6+3
6+3
6+3
Centre Height
130 mm
130 mm
150 mm
155 mm
220 mm
WORK HEAD
Work Head Speeds r.p.m. 3 Steps (SGI 305/455/600/800 mm)
50 to 350
Morse Taper Center
No. 3
Work Head Speeds r.p.m. 4 steps (SGI 1000-1250/1500-2000 mm)
