Medium Duty Lathe Machine
- Regular price
- Rs. 90,000.00
- Sale price
- Rs. 90,000.00
- Unit price
- /per
In stock
basic type of lathe that may be considered the archetypical class of metalworking lathe most often used by the general machinist or machining hobbyist. The name bench lathe implies a version of this class small enough to be mounted on a workbench (but still full-featured, and larger than mini-lathes or micro-lathes). The construction of a center lathe is detailed above, but depending on the year of manufacture, size, price range or desired features, even these lathes can vary widely between models.
- SAFE GUARD
- MOTOR RAILS & V PULLEY
- CHANGE GEAR SET
- SWITCH STAND
- THREAD DIAL
- SQUARE TOOL POST
- DEAD CENTER NO-2
- SPINDLE SLEEVE
- Electric Motor
- Starter or Electric Coolant Pump
- 4jaw independent chuck
- 3jaw self centering chuck
- Gears to cut metric threads
- Taper turning attachment
- Tool post grinder & Double Gap or Triple Gap etc.
- MINI TOOL ROOM
- EDUCATIONAL INSTITUTES
- INDUSTRIAL TRAINING CENTRES
- ENGINEERING COLLEGES
- DIPLOMA COLLEGES
| Model | HML-4 | HML-6 | ||
|---|---|---|---|---|
| SPECIFICATION | 4’.1/2”(1370 MM) | 6’.00”(1825 MM) | ||
| INCH | MM | INCH | MM | |
| BED WIDTH | 11” | 279 | 11” | 279 |
| HEIGHT OF CENTRE OVER FLAT BED WAYS | 8” | 203” | 8” | 203” |
| MAXIMUM SWING OVER BED | 16” | 405” | 16” | 405” |
| MAXIMUM SWING OVER CROSS LIDE | 9” | 228” | 9” | 228” |
| MAXIMUM SWING IN GAP | 23” | 580” | 23” | 580” |
| ADMIT BETWEEN CENTRE | 25″ | 635″ | 34″ | 860” |
| SPINDLE NOSE | 6TPI | 6TPI | ||
| NUMBER OF SPINDLE SPEED | 6” | 6” | ||
| DIAMETER OF HOLE THROUGH SPINDLE | 21/16” | 52 | 21/16” | 52 |
| INCH RANGE THREADS | 4 TO 60 TPI | 4 TO 60 TPI | ||
| METRIC RANGE THREADS | 0.5 TO 7.5 MM | 0.5 TO 7.5 MM | ||
| LED SREW DIA & PITCH | 1.1/4” | 31.75 | 1.1/4” | 31.75 |
| FEAD SAFT DIA | 7/8″ | 22.22 | 7/8″ | 22.22 |
| TAIL STOCK SPINDLE TAPER BORE | Mt4 | Mt4 | ||
| TAIL STOCK SPINDLE TRAVEL | 5.1/2 | 140 | 5.1/2 | 140 |
| POWER REQUIRED | 2 HP 1440 RPM | 2 HP 1440 RPM | ||
| APPROX WEIGHT | 650 KG | 750 KG | ||
Adding product to your cart
basic type of lathe that may be considered the archetypical class of metalworking lathe most often used by the general machinist or machining hobbyist. The name bench lathe implies a version of this class small enough to be mounted on a workbench (but still full-featured, and larger than mini-lathes or micro-lathes). The construction of a center lathe is detailed above, but depending on the year of manufacture, size, price range or desired features, even these lathes can vary widely between models.
- SAFE GUARD
- MOTOR RAILS & V PULLEY
- CHANGE GEAR SET
- SWITCH STAND
- THREAD DIAL
- SQUARE TOOL POST
- DEAD CENTER NO-2
- SPINDLE SLEEVE
- Electric Motor
- Starter or Electric Coolant Pump
- 4jaw independent chuck
- 3jaw self centering chuck
- Gears to cut metric threads
- Taper turning attachment
- Tool post grinder & Double Gap or Triple Gap etc.
- MINI TOOL ROOM
- EDUCATIONAL INSTITUTES
- INDUSTRIAL TRAINING CENTRES
- ENGINEERING COLLEGES
- DIPLOMA COLLEGES
| Model | HML-4 | HML-6 | ||
|---|---|---|---|---|
| SPECIFICATION | 4’.1/2”(1370 MM) | 6’.00”(1825 MM) | ||
| INCH | MM | INCH | MM | |
| BED WIDTH | 11” | 279 | 11” | 279 |
| HEIGHT OF CENTRE OVER FLAT BED WAYS | 8” | 203” | 8” | 203” |
| MAXIMUM SWING OVER BED | 16” | 405” | 16” | 405” |
| MAXIMUM SWING OVER CROSS LIDE | 9” | 228” | 9” | 228” |
| MAXIMUM SWING IN GAP | 23” | 580” | 23” | 580” |
| ADMIT BETWEEN CENTRE | 25″ | 635″ | 34″ | 860” |
| SPINDLE NOSE | 6TPI | 6TPI | ||
| NUMBER OF SPINDLE SPEED | 6” | 6” | ||
| DIAMETER OF HOLE THROUGH SPINDLE | 21/16” | 52 | 21/16” | 52 |
| INCH RANGE THREADS | 4 TO 60 TPI | 4 TO 60 TPI | ||
| METRIC RANGE THREADS | 0.5 TO 7.5 MM | 0.5 TO 7.5 MM | ||
| LED SREW DIA & PITCH | 1.1/4” | 31.75 | 1.1/4” | 31.75 |
| FEAD SAFT DIA | 7/8″ | 22.22 | 7/8″ | 22.22 |
| TAIL STOCK SPINDLE TAPER BORE | Mt4 | Mt4 | ||
| TAIL STOCK SPINDLE TRAVEL | 5.1/2 | 140 | 5.1/2 | 140 |
| POWER REQUIRED | 2 HP 1440 RPM | 2 HP 1440 RPM | ||
| APPROX WEIGHT | 650 KG | 750 KG | ||
basic type of lathe that may be considered the archetypical class of metalworking lathe most often used by the general machinist or machining hobbyist. The name bench lathe implies a version of this class small enough to be mounted on a workbench (but still full-featured, and larger than mini-lathes or micro-lathes). The construction of a center lathe is detailed above, but depending on the year of manufacture, size, price range or desired features, even these lathes can vary widely between models.
- SAFE GUARD
- MOTOR RAILS & V PULLEY
- CHANGE GEAR SET
- SWITCH STAND
- THREAD DIAL
- SQUARE TOOL POST
- DEAD CENTER NO-2
- SPINDLE SLEEVE
- Electric Motor
- Starter or Electric Coolant Pump
- 4jaw independent chuck
- 3jaw self centering chuck
- Gears to cut metric threads
- Taper turning attachment
- Tool post grinder & Double Gap or Triple Gap etc.
- MINI TOOL ROOM
- EDUCATIONAL INSTITUTES
- INDUSTRIAL TRAINING CENTRES
- ENGINEERING COLLEGES
- DIPLOMA COLLEGES
| Model | HML-4 | HML-6 | ||
|---|---|---|---|---|
| SPECIFICATION | 4’.1/2”(1370 MM) | 6’.00”(1825 MM) | ||
| INCH | MM | INCH | MM | |
| BED WIDTH | 11” | 279 | 11” | 279 |
| HEIGHT OF CENTRE OVER FLAT BED WAYS | 8” | 203” | 8” | 203” |
| MAXIMUM SWING OVER BED | 16” | 405” | 16” | 405” |
| MAXIMUM SWING OVER CROSS LIDE | 9” | 228” | 9” | 228” |
| MAXIMUM SWING IN GAP | 23” | 580” | 23” | 580” |
| ADMIT BETWEEN CENTRE | 25″ | 635″ | 34″ | 860” |
| SPINDLE NOSE | 6TPI | 6TPI | ||
| NUMBER OF SPINDLE SPEED | 6” | 6” | ||
| DIAMETER OF HOLE THROUGH SPINDLE | 21/16” | 52 | 21/16” | 52 |
| INCH RANGE THREADS | 4 TO 60 TPI | 4 TO 60 TPI | ||
| METRIC RANGE THREADS | 0.5 TO 7.5 MM | 0.5 TO 7.5 MM | ||
| LED SREW DIA & PITCH | 1.1/4” | 31.75 | 1.1/4” | 31.75 |
| FEAD SAFT DIA | 7/8″ | 22.22 | 7/8″ | 22.22 |
| TAIL STOCK SPINDLE TAPER BORE | Mt4 | Mt4 | ||
| TAIL STOCK SPINDLE TRAVEL | 5.1/2 | 140 | 5.1/2 | 140 |
| POWER REQUIRED | 2 HP 1440 RPM | 2 HP 1440 RPM | ||
| APPROX WEIGHT | 650 KG | 750 KG | ||
basic type of lathe that may be considered the archetypical class of metalworking lathe most often used by the general machinist or machining hobbyist. The name bench lathe implies a version of this class small enough to be mounted on a workbench (but still full-featured, and larger than mini-lathes or micro-lathes). The construction of a center lathe is detailed above, but depending on the year of manufacture, size, price range or desired features, even these lathes can vary widely between models.
- SAFE GUARD
- MOTOR RAILS & V PULLEY
- CHANGE GEAR SET
- SWITCH STAND
- THREAD DIAL
- SQUARE TOOL POST
- DEAD CENTER NO-2
- SPINDLE SLEEVE
- Electric Motor
- Starter or Electric Coolant Pump
- 4jaw independent chuck
- 3jaw self centering chuck
- Gears to cut metric threads
- Taper turning attachment
- Tool post grinder & Double Gap or Triple Gap etc.
- MINI TOOL ROOM
- EDUCATIONAL INSTITUTES
- INDUSTRIAL TRAINING CENTRES
- ENGINEERING COLLEGES
- DIPLOMA COLLEGES
| Model | HML-4 | HML-6 | ||
|---|---|---|---|---|
| SPECIFICATION | 4’.1/2”(1370 MM) | 6’.00”(1825 MM) | ||
| INCH | MM | INCH | MM | |
| BED WIDTH | 11” | 279 | 11” | 279 |
| HEIGHT OF CENTRE OVER FLAT BED WAYS | 8” | 203” | 8” | 203” |
| MAXIMUM SWING OVER BED | 16” | 405” | 16” | 405” |
| MAXIMUM SWING OVER CROSS LIDE | 9” | 228” | 9” | 228” |
| MAXIMUM SWING IN GAP | 23” | 580” | 23” | 580” |
| ADMIT BETWEEN CENTRE | 25″ | 635″ | 34″ | 860” |
| SPINDLE NOSE | 6TPI | 6TPI | ||
| NUMBER OF SPINDLE SPEED | 6” | 6” | ||
| DIAMETER OF HOLE THROUGH SPINDLE | 21/16” | 52 | 21/16” | 52 |
| INCH RANGE THREADS | 4 TO 60 TPI | 4 TO 60 TPI | ||
| METRIC RANGE THREADS | 0.5 TO 7.5 MM | 0.5 TO 7.5 MM | ||
| LED SREW DIA & PITCH | 1.1/4” | 31.75 | 1.1/4” | 31.75 |
| FEAD SAFT DIA | 7/8″ | 22.22 | 7/8″ | 22.22 |
| TAIL STOCK SPINDLE TAPER BORE | Mt4 | Mt4 | ||
| TAIL STOCK SPINDLE TRAVEL | 5.1/2 | 140 | 5.1/2 | 140 |
| POWER REQUIRED | 2 HP 1440 RPM | 2 HP 1440 RPM | ||
| APPROX WEIGHT | 650 KG | 750 KG | ||
basic type of lathe that may be considered the archetypical class of metalworking lathe most often used by the general machinist or machining hobbyist. The name bench lathe implies a version of this class small enough to be mounted on a workbench (but still full-featured, and larger than mini-lathes or micro-lathes). The construction of a center lathe is detailed above, but depending on the year of manufacture, size, price range or desired features, even these lathes can vary widely between models.
- SAFE GUARD
- MOTOR RAILS & V PULLEY
- CHANGE GEAR SET
- SWITCH STAND
- THREAD DIAL
- SQUARE TOOL POST
- DEAD CENTER NO-2
- SPINDLE SLEEVE
- Electric Motor
- Starter or Electric Coolant Pump
- 4jaw independent chuck
- 3jaw self centering chuck
- Gears to cut metric threads
- Taper turning attachment
- Tool post grinder & Double Gap or Triple Gap etc.
- MINI TOOL ROOM
- EDUCATIONAL INSTITUTES
- INDUSTRIAL TRAINING CENTRES
- ENGINEERING COLLEGES
- DIPLOMA COLLEGES
| Model | HML-4 | HML-6 | ||
|---|---|---|---|---|
| SPECIFICATION | 4’.1/2”(1370 MM) | 6’.00”(1825 MM) | ||
| INCH | MM | INCH | MM | |
| BED WIDTH | 11” | 279 | 11” | 279 |
| HEIGHT OF CENTRE OVER FLAT BED WAYS | 8” | 203” | 8” | 203” |
| MAXIMUM SWING OVER BED | 16” | 405” | 16” | 405” |
| MAXIMUM SWING OVER CROSS LIDE | 9” | 228” | 9” | 228” |
| MAXIMUM SWING IN GAP | 23” | 580” | 23” | 580” |
| ADMIT BETWEEN CENTRE | 25″ | 635″ | 34″ | 860” |
| SPINDLE NOSE | 6TPI | 6TPI | ||
| NUMBER OF SPINDLE SPEED | 6” | 6” | ||
| DIAMETER OF HOLE THROUGH SPINDLE | 21/16” | 52 | 21/16” | 52 |
| INCH RANGE THREADS | 4 TO 60 TPI | 4 TO 60 TPI | ||
| METRIC RANGE THREADS | 0.5 TO 7.5 MM | 0.5 TO 7.5 MM | ||
| LED SREW DIA & PITCH | 1.1/4” | 31.75 | 1.1/4” | 31.75 |
| FEAD SAFT DIA | 7/8″ | 22.22 | 7/8″ | 22.22 |
| TAIL STOCK SPINDLE TAPER BORE | Mt4 | Mt4 | ||
| TAIL STOCK SPINDLE TRAVEL | 5.1/2 | 140 | 5.1/2 | 140 |
| POWER REQUIRED | 2 HP 1440 RPM | 2 HP 1440 RPM | ||
| APPROX WEIGHT | 650 KG | 750 KG | ||
basic type of lathe that may be considered the archetypical class of metalworking lathe most often used by the general machinist or machining hobbyist. The name bench lathe implies a version of this class small enough to be mounted on a workbench (but still full-featured, and larger than mini-lathes or micro-lathes). The construction of a center lathe is detailed above, but depending on the year of manufacture, size, price range or desired features, even these lathes can vary widely between models.
- SAFE GUARD
- MOTOR RAILS & V PULLEY
- CHANGE GEAR SET
- SWITCH STAND
- THREAD DIAL
- SQUARE TOOL POST
- DEAD CENTER NO-2
- SPINDLE SLEEVE
- Electric Motor
- Starter or Electric Coolant Pump
- 4jaw independent chuck
- 3jaw self centering chuck
- Gears to cut metric threads
- Taper turning attachment
- Tool post grinder & Double Gap or Triple Gap etc.
- MINI TOOL ROOM
- EDUCATIONAL INSTITUTES
- INDUSTRIAL TRAINING CENTRES
- ENGINEERING COLLEGES
- DIPLOMA COLLEGES
| Model | HML-4 | HML-6 | ||
|---|---|---|---|---|
| SPECIFICATION | 4’.1/2”(1370 MM) | 6’.00”(1825 MM) | ||
| INCH | MM | INCH | MM | |
| BED WIDTH | 11” | 279 | 11” | 279 |
| HEIGHT OF CENTRE OVER FLAT BED WAYS | 8” | 203” | 8” | 203” |
| MAXIMUM SWING OVER BED | 16” | 405” | 16” | 405” |
| MAXIMUM SWING OVER CROSS LIDE | 9” | 228” | 9” | 228” |
| MAXIMUM SWING IN GAP | 23” | 580” | 23” | 580” |
| ADMIT BETWEEN CENTRE | 25″ | 635″ | 34″ | 860” |
| SPINDLE NOSE | 6TPI | 6TPI | ||
| NUMBER OF SPINDLE SPEED | 6” | 6” | ||
| DIAMETER OF HOLE THROUGH SPINDLE | 21/16” | 52 | 21/16” | 52 |
| INCH RANGE THREADS | 4 TO 60 TPI | 4 TO 60 TPI | ||
| METRIC RANGE THREADS | 0.5 TO 7.5 MM | 0.5 TO 7.5 MM | ||
| LED SREW DIA & PITCH | 1.1/4” | 31.75 | 1.1/4” | 31.75 |
| FEAD SAFT DIA | 7/8″ | 22.22 | 7/8″ | 22.22 |
| TAIL STOCK SPINDLE TAPER BORE | Mt4 | Mt4 | ||
| TAIL STOCK SPINDLE TRAVEL | 5.1/2 | 140 | 5.1/2 | 140 |
| POWER REQUIRED | 2 HP 1440 RPM | 2 HP 1440 RPM | ||
| APPROX WEIGHT | 650 KG | 750 KG | ||